150W Single Output Switching Power Supply With PFC

power supply Features: ·Universal AC input / Full range ·Built-in active PFC function, PF>0.93 ·100% full load burn-in test ·Protections: Short circuit / Over load / Over voltage / Over temp. ·Built-in constant current limiting circuit ·LED indicator for power on ·Remote ON-OFF control(optional) ·Fixed switching frequency at PFC: 67KHz, PWM: 134KHz ·1 years warranty ·Dimension: 199*99*50mm (L*W*H) Specification: 1) INPUT ·Voltage Range: 85-264VAC, 120-370VDC; 47-63Hz ·Power Factor: PF>0.93/230VAC PF>0.98/115VAC at full load ·AC Current: 2.5A/115VAC 1.2A/230VAC ·Inrush Current: Cold start 40A/230VAC ·Leakage Current: <2mA/240VAC 2) PROTECTION ·Over Load: 105%-150%; Constant current limiting, recovers automatically after fault condition is removed. ·Over Voltage: 115%-135%; Shut down o/p voltage, re-power on to recover. ·Over temp.: TSW1(Power transistor) Temp.at 95±5ºC, shutdown o/p voltage; Temp.<95±5ºC, O/I auto-recovery. ·Remote control(option): CN1: 4-10VDC POWER ON, <0-0.8VDC POWER OFF 3) ENVIRONMENT ·Working Temp. & Humidity: -10ºC +60ºC; 20% 90% RH. ·Storage Temp. & Humidity: -20ºC +85ºC; 10% 95% RH. ·Vibration: 10 500Hz, 2G 10min./1 cycle, period for 60min, each along X, Y, Z axes. 4) SAFETY STANDARDS ·Withstand Voltage; I/P-O/P: 3KVAC; I/P-FG: 1.5KVAC; O/P-FG: 0.5KVAC ·Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100MΩ/500VDC ·Safety Standards: Design refer to UL1950, TUV, EN60950 ·EMC Standards: Design refer to EN55022, EN61000-3-2,-3, EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024 5) Type No | Output | Tol. | R&N | Effi.HSP-150-3.3 | 3.3V, 30A | ±2% | 100mV | 67% HSP-150-5 | 5V, 30A | ±2% | 100mV | 75% HSP-150-7.5 | 7.5V, 20A | ±2% | 100mV | 79% HSP-150-12 | 12V, 12.5A | ±2% | 100mV | 80% HSP-150-13.5 | 13.5V, 11.2A | ±2% | 100mV | 80% HSP-150-15 | 15V, 10A | ±2% | 100mV | 81% HSP-150-24 | 24V, 6.3A | ±1% | 150mV | 83% HSP-150-27 | 27V, 5.6A | ±1% | 150mV | 84% HSP-150-48 | 48V, 3.2A | ±1% | 250mV | 84%